Close
SciStat
 

Control chart

In this chart the data are plotted consecutively, together with a line at the mean, and at −2s, +2s, −3s and +3s (s = standard deviation), i.e. at 95% and 99.7% confidence limits.

Required input

In the Control chart dialog box you define the data to be represented in the quality control chart. First, enter the variable's name in the variable input field. Optionally, you may also enter a filter in order to include only selected data in the graph, e.g. measurements by a particular technician. Also you can enter a variable containing labels for the X-axis (e.g. dates).

Next select the type of control limits:

  • Based on date

    The control limits can be based on the data and in this case the program will calculate the mean and standard deviation of the selected data.

    Option: "until n =" : if the control limits must be based on the first observations only, you can enter the required number here. E.g. if you have 40 observations to be plotted in the control chart, but the control limits must be based on the first 20 observations only, you enter the number 20 here.

  • Standard

    You can select 'Standard' and in this case enter the Mean and Standard Deviation (SD) of the standard used.

  • User-defined limits

    Finally, you can enter the reference value with upper and lower control and warning limits. In this case the upper and lower control and warning limits can be asymmetrical.

Custom control chart

When there are no data available for the variable, the program will ask whether you want to create a custom control chart, i.e. a blank control chart that you can print and on which the lab technician can mark the control measurements manually.

Rules

When you click the Select rules button, the following dialog box is displayed, in which you can select a combination of rules to be applied in the control chart:

Control chart

1:2S rule

If you select the 1:2S rule then the software will check all following rules only if the measurement exceeds the mean ± 2SD (or the warning limits).
If this rule is not selected, then the following rules will be checked also when the measurement does not exceed the mean ± 2SD warning limits.
This will particularly influence the 4:1S rule and 10:X rule.

1:3S rule

If the measurement exceeds the mean + 3SD or mean − 3SD, then the run is considered out of control.
This rule mainly detects random error, but may also be an indication of a large systematic error.

2:2S rule

The run is considered out of control when 2 consecutive measurements exceed the same mean + 2S or the same mean − 2S limit.
This rule detects systematic error.

4:1S rule

The run is considered out of control when 4 or more consecutive measurements exceed the same (mean + 1S) or (mean − 1S) limit.
This rule detects systematic bias.

10:X rule

The run is considered out of control when 10 or more consecutive measurements are on the same side of the mean. The software allows you to select a different value less than 10 for a higher sensitivity or more than 10 for a lower sensitivity of this rule.
This rule detects systematic bias.

Literature

  • Westgard JO, Barry PL, Hunt MR, Groth T (1981) A multi-rule Shewhart chart for Quality Control in Clinical Chemistry. Clinical Chemistry, 27, 493-501.

See also

Link

Go to Control chart.